Back to insights

Here’s where sustainability meets process reality

Semiconductor manufacturers can reduce resource demand through engineering that connects water reuse, gas recovery and energy efficiency with production requirements illustrated by two case studies.

Semiconductor manufacturing depends on water, speciality gases and strictly controlled environments. Reducing the resources a fab consumes means understanding exactly how each process operates, what purity it demands and where recovery can be introduced without putting production at risk. We illustrated this in a case study on a water circularity design for a global semiconductor device manufacturer, and in gas recovery at a leading technical university in the Netherlands.

This is where Deerns helps clients implement resource-efficiency opportunities that align environmental objectives with operational and investment priorities. We turn environmental ambitions into systems that work in practice, supporting manufacturers and equipment suppliers from first feasibility study through technical specification to detailed design and operations. Because we stay close to operational requirements at every stage, our clients gain facilities that are more sustainable without compromising yield, uptime or process integrity.

We also help clients build an investment case that reflects the full picture. Some measures pay back quickly through lower operating costs. Others cannot be justified by short payback periods alone, yet matter for resource security, production continuity and long-term environmental performance. By weighing these factors together, we give clients the clarity to decide with confidence which improvements to prioritise and when.

Case Study: water circularity

Water reuse starts with understanding individual wastewater streams. Their composition determines the treatment needed and the applications they can serve. Recovering water successfully therefore requires coordination between process equipment, collection networks, treatment systems and quality control.

For a leading global semiconductor device manufacturer, Deerns developed a rinse water reclaim design with an annual capacity of approximately 250,000 cubic metres. The work began with a site assessment covering equipment layouts and existing connections. We redesigned the collection arrangement to direct suitable rinse water towards buffer storage and treatment, with the aim of integrating recovery without disrupting productivity and operations.

A modular approach can serve individual tools or groups of compatible systems, allowing recovery infrastructure to be sized around available space and actual demand. A separate project addressed water recovery from chemical mechanical polishing, which uses chemical slurries and mechanical action to smooth wafer surfaces. Its stated design capacity was approximately 230,000 cubic metres annually.

Case Study: Recovering process gases to standard

Gas recovery presents a similar challenge. Collecting a resource is only useful if it can be returned to the specification the process requires. In semiconductor production, where purity demands are exacting, that makes treatment and verification central to any reuse strategy. Recovery must therefore be designed around the process it serves.

At a leading technical university in the Netherlands, Deerns designed a helium recovery system in collaboration with a specialist hardware supplier. Deerns designed the installation to capture, recycle and re-liquefy helium that would otherwise be lost. Combining our electronics engineering expertise with the supplier’s specialist recovery technology helped ensure that the system meets the site’s operational requirements.

Hydrogen reuse in extreme ultraviolet lithography offers another example. Working with technology partners, Deerns carried out the feasibility study and design for a recovery system, which the partners then developed into hardware. After several rounds of iteration and optimisation, the recovered hydrogen met the specification required for hydrogen supply.

Reducing energy demand through facility design

Resource recovery must be weighed against the energy it takes to operate. Treatment, pumping and gas processing all add their own demands, so a sound sustainability assessment looks at the overall balance and accounts for how decisions about water or gases affect the facility’s energy consumption.

Heating, ventilation and air conditioning (HVAC) offer an important opportunity to improve that balance. These systems maintain the conditions semiconductor processes depend on, so their design should match the environmental requirements precisely. This means looking closely at how systems work together and where unnecessary energy demand can be removed.

The engineering assessment should establish 3 key parameters:

  • Which environmental conditions and client processes are essential, now and in the future.
  • Where system design or controls create avoidable consumption.
  • How improvements will be implemented while protecting production.

This supports a shift from compliance driven sustainability towards low-carbon factory design. Energy performance becomes a design consideration from the outset, with expected improvements assessed against the facility’s starting point and operating conditions.

Making sustainability an engineering decision

These examples show why resource management needs detailed engineering. A water reuse ambition depends on well-planned collection routes and clear treatment specifications. Gas recovery depends on purity and equipment integration. Energy efficiency starts with understanding the conditions that production actually needs. Because each of these elements affects the others, every opportunity must be evaluated within the facility as a single integrated system.

Deerns brings these decisions together through semiconductor expertise, multidisciplinary design and close collaboration with suppliers and clients. Our role is to establish what is technically achievable, define how it can be implemented and help clients assess its value. That gives sustainability a practical place in investment and facility planning. The goal is semiconductor production that retains more resources in use and meets its performance requirements with less environmental impact.

Related thoughts

Let’s talk


Eric Stuiver

Sector Director Electronics

Array